Through investigation and feedback, customers will more or less encounter some problems when using flour stone mill. In line with the principle of convenience and service to customers, we will carry out knowledge explanation activities of flour and stone mill products from time to time, discuss with you the problems that customers often encounter or are difficult to solve, and find solutions, hoping to help customers use the company's products better.

用小粉加工硬小麥時，通常采用“先清粉后入渣”的渣磨工藝。該工藝的主要特點是面粉清選范圍廣，一級優良粗顆粒提取率高，入渣磨物料質量均勻，研磨周轉率低，適合加工高硬度小麥。缺點是清洗設備的使用偏多，磨渣機的材料沒有選好，磨渣機的作用沒有充分發揮。

When processing durum wheat with small flour, the slag grinding process of "clearing flour first and then adding slag" is usually adopted. The main characteristics of the process are wide range of flour cleaning, high extraction rate of first-class fine coarse particles, uniform quality of materials into slag grinding, low grinding turnover rate, suitable for processing high hardness wheat. The disadvantage is that the use of cleaning equipment is too much, the material of slag grinding machine is not well selected, and the role of slag grinding machine is not fully played.

用小面粉加工軟小麥時，可采用“先渣后渣”的方法。該工藝的主要特點是充分發揮渣磨系統的作用，清選范圍略窄，清選機數量少，適合加工軟質小麥。缺點是礦渣磨料質量不均勻，小型面粉機周轉率高，一級品質粗顆粒的提取率稍低。

When processing soft wheat with flour, the method of "dregs before dregs" can be used. The main characteristics of the process are that the slag grinding system is fully used, the cleaning range is slightly narrow, and the number of cleaning machines is small, which is suitable for processing soft wheat. The disadvantages are uneven quality of slag abrasives, high turnover rate of small flour machine, and slightly low extraction rate of first-class quality coarse particles.

在提取優良面粉時，通常采用“先清粉、后進渣、后清粉”的渣磨系統。這一工藝的主要特點是不僅充分發揮面粉清選系統的作用，而且充分挖掘渣磨系統的潛力，盡可能多地提取出一流的粗糧和粗面。該工藝具有提取大量高精度面粉的能力。缺點是清洗機的數量和管理要求稍高。根據平篩的流量、篩分物料的特性以及制粉過程中流量平衡的要求，確定了渣磨平板篩分級篩的選擇。

In the process of extracting fine flour, the slag grinding system of "clear powder first, then slag, then clear powder" is usually used. The main feature of this process is not only to give full play to the role of flour cleaning system, but also to fully tap the potential of slag grinding system, so as to extract as many first-class coarse grains and coarse flour as possible. This technology has the ability to extract a large amount of high-precision flour. The disadvantage is that the number of cleaning machines and management requirements are slightly higher. According to the flow rate of flat screen, the characteristics of screened materials and the requirement of flow balance in pulverizing process, the selection of classification screen of flat screen for slag mill is determined.

以上就是關于面粉石磨機的渣磨流程不同特點的不同，僅供參考，詳細請關注我們。

The above is about the flour mill slag grinding process of different characteristics, for reference only, please pay attention to us.